How To Replace Multipure Water Filter Youtube

Last updated - Nov 29th, 2021

Reverse osmosis water filters are a dandy way of providing your family with clean water. However, in order to have filtered water all the time, you must maintain the filtration system. Replacing the filters is very important when it comes to maintenance. That is why today, we are going to effort to cover some of the nearly common questions of Apec water filter replacement.

The reverse osmosis systems that Apec offers have different stages that use unlike kinds of filters. Still, that wouldn't be a problem if each filter didn't take a different lifespan. Therefore, information technology is of import to know a chip more about the schedule of Apec h2o filter replacements.

Contents

Filter Replacement Frequency
- Stage 1 to Iii Filters
- Stage Four and 5 Filters
Membranes Replacement Frequency
How to Supplant Filters
- i. Stages ane-3 Pre-Filters
- ii. Stage 4 Membranes
- 3. Stage 5 Carbon Filter
Why Should I Replace
Concluding Verdict

Filter Replacement Frequency

Since different stages mean different lifespans, y'all need to know how oft each stage needs to be replaced. Most Apec systems accept v stages of filtration. The filters from stages 1-3 have to be replaced once. However, you may need to supplant them even sooner depending on the level of usage. The filters from stage 4 and stage 5 should be replaced every 2-4 years. This is the schedule for nearly Apec reverse osmosis systems. But, if the schedule for your model is any different, yous should stick to that.

how the Apec Water sendiment filter works

Stage I to Three Filters

Some other gene that can affect the lifespan of the filters is the type of water you use. If you are using well water, the filters on stages 1-3 should be replaced every 6 months. On the other side, if you are using metropolis h2o, you should supersede them every 8000 gallons filtered.

Stage Four and 5 Filters

The stage four membrane should be replaced every iii-five years if you are using city water. If you are using well water, it is recommended to supercede information technology every two-3 years. Now the filter from the last phase should be replaced along with the one from phase 4.

Filter	When To Alter
Phase i, 2, and 3 (City Water Usage)	6-12 months
Stages 1, 2, and three (Well Water Usage)	6-8 months
Stage 4 (City Water Usage)	3-5 years
Phase 4 (Well H2o Usage)	2-three years
Stage 5 (Both City And Well Water Usage)	2-4 years

Membranes Replacement Frequency

Different contrary osmosis models of Apec hateful different membrane replacing schedules. Now, at that place are three models you can find. The 180gpd, the 240gpd, and the 360gpd one. The first one has two 90gpd membranes which should be replaced at the same time. The 2d model has three 90gpd membranes and the third one for 90gpd membranes. Regardless of the model yous choose, you should supercede all the membranes at the same time.

How to Replace Filters

Now that nosotros take covered the Apec h2o filters replacement schedule, we should movement on to the instructions.

How To Supersede Apec (ROES-PH75) Opposite Osmosis Filters and Membrane - Phase one-6

1. Stages one-3 Pre-Filters

Firstly, shut off the common cold water supply to the RO organization. Then, later you shut off the tank's ball valve, lift up the faucet lever to save the pressure. This way opening the housings will be a slice of cake.
Now, accept the RO standing upright and open up the housing. If y'all don't accept good leverage, lay the contrary osmosis system down. Open the housing using a plastic wrench turning clockwise.
Discard the erstwhile filters from their housings. Wash the housings carefully with mild lather. Subsequently you take washed that, place the new filters in their housings. The sediment filter in the first stage and the carbon cake filters in the second and 3rd stages.
After closing the housings make sure to tighten them using a wrench.

ii. Phase iv Membranes

First off, locate the housing of the membrane.
Later yous have located them, commencement inserting the membranes. Open the cap after removing the tubing from it, and insert the membrane.
Recall to close the cap and reconnect the tubing to information technology as before. Don't forget to connect each tubing to its matching housing. That part should exist quite easy since they are all color-coded.
Continue inserting all remaining membranes the same way.

3. Stage five Carbon Filter

Find and remove the old stage five carbon filter. Disconnect the output tubing at point H and the input tubing at betoken 1000.
Discard the old filter and insert the new i.
After reconnecting the output and the input tubing but make sure that the flow is pointing to the output direction.

Why Should I Supersede

To go far easier for you to sympathize, remember that filters piece of work just like lint trays. Filters basically remove all the extra particles and debris that aren't supposed to be there. This is how the organization ensures that you get clean, filtered h2o. The same mode the lint collector removes the extra lint from your clothes. And then, if you don't replace the filters on time, particles can clog upward the filter.

One time that starts happening, the filter starts condign less and less effective. In order to keep your system effective, you need to stick to the schedule and replace the Apec water filters on time.

Final Verdict

As yous accept seen replacing the filters regularly is quite important. Not only volition that prevent bug that contaminants tin can cause, merely it also keeps the odor out of your water. Therefore, if you have a filter that needs to be replaced, await no longer!

The schedule nosotros provided you lot with today works with most Apec contrary osmosis systems. However, if the schedule for your model is any different, just follow that one.